Chapter 18: Clone Unit; Overview; Clone - HORNER APG XL10 PRIME OCS User Manual

CHAPTER 18:

18.1 Overview

'Clone Unit' feature allows the user to "clone" the OCS of the exact same model. This feature "clones"
application program and unit settings stored in battery-backed RAM of an OCS into the RM. Refer to the
Removable Media chapter for details in using RM. It can then be used to clone a different OCS (same
model).
This feature can be used for:
- Replacing an OCS by another unit of the same model.
- Duplicating or "clone" units without a PC.

18.2 Clone

User needs to perform the following to Clone:
1. The 'Clone Unit' can be accessed by going to the 'System Menu' of the OCS. A new menu "Clone
Unit" has been added at the end of the main System Menu as shown below:
2. Selecting "Clone Unit" menu will open the following menu screen:
J u l y 6 , 2 0 2 2
CLONE UNIT
Figure 18.1 – System Menu
Figure 18.2 – Clone Unit Menu before Cloning
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 158 | 195