View Status - HORNER APG EXL10 OCS User Manual

5.4

View Status

The View Status Sub-Menu displays up to 19 System Settings. Only the OCS Mode System Setting is
editable.
Model
OCS Mode
Scan Rate(mS)
OCS Net Use %
All Net Use %
Ladder Size
Config Size
Graphics Size
String Size
Bitmap Size
Text Tbl Size
Font Tbl Size
Protocol Size
SMS File Size
Firmware Rev
OS Ver
FPGA Rev
InitRD Rev
Self-Test
t h
A p r i l 2 4 , 2 0 2 0
XW1yz= Model number of this EXL10 OCS unit
1yz = indicates the installed I/O module
00 = no I/O module
Idle = EXL10 OCS is in Idle mode
DoIO = EXL10 OCS is in Do I/O mode
Run = EXL10 OCS is in Run mode
0.0 = EXL10 OCS is not in Run mode
0.1 to 999.9= Average number of mS for each ladder scan
0.0 to 100.0 = CAN network bandwidth % used by this EXL10 OCS node
0.0 to 100.0 = CAN network bandwidth % used by all nodes
x = Number of bytes in application ladder program
x = Number of bytes in application I/O configuration
x = Number of bytes in application graphic screens
x = Number of bytes in application string table
x = Number of bytes in application bitmaps
x = Number of bytes in application text tables
x = Number of bytes in application font tables
x = Number of bytes in application downloaded protocols
x = Number of bytes in application SMS protocol configuration
xx.yy = Current firmware version
a.b.cd.yz = Current Operating System version
x.y = Current FPGA version (High-Speed I/O Sub System)
x.yz = Bootloader version
Ok = All power-on self-tests passed
MAN1029-08-EN_EXL10_UserManual
P a g e 29 | 191