CHAPTER 22:
22.1 Firmware Updates
The EXL10 OCS products contain field updatable firmware to allow new features to be added to the
product at a later time. Firmware updates should only be performed when a new feature or correction is
required.
Warning: Firmware updates should only be performed when the equipment being controlled by the
EXL10 OCS is in a safe, non-operational state. Communication or hardware failures during the
firmware update process can cause the controller to behave erratically resulting in injury or
equipment damage. Make sure the functions of the equipment work properly after a firmware update
before returning the device to an operational mode.
22.2 How to Check for Current Firmware Revision
To check the firmware revision on a controller, open System Menu → View Status.
t h
A p r i l 2 4
, 2 0 2 0
MAINTENANCE
MAN1029-08-EN_EXL10_UserManual
P a g e 174 | 191