Additional Printer Specific Tools - HID DTC1000M User Manual

© 2012 HID Global Corporation

Additional Printer Specific Tools

Label Description
 Printer Type
INFO
 Firmware Version
 IP Address
 Flipper
 Lamination
 Magnetics
 E-Card
 Password
 Card count
TEST Color Photo:
PRINTS
Select this to print a color card to test communication and integrity.
Alignment:
Select this to print a card used to align the print image on the card.
Settings:
Select this to print a card with the Advanced settings.
Resin:
Select this to print a RESIN test card.
Rewritable:
Select this to ERASE the Rewritable card.
Magnetic:
Select this to test Magnetic encoding. (Hi-Co only)
Lamination:
Select this to laminate a test card.
Hopper Ability to select which hopper to feed cards from. Applies to Dual
Select
Hopper Printers.
Toolbox
Clean Printer:
Select this to run the clean printer routine.
Clean Laminator:
Select this to run the clean laminator routine.
Calibrate Mag:
Select this to calibrate the Magnetic Sensor
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
All rights reserved
99