HID DTC1000M User Manual page 53

© 2012 HID Global Corporation
Using the Advanced Settings tab
Setting
Enable Swift ID over USB
connection
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
Option
Check this item to utilize Swift ID via a USB connection.
When this box is checked the Ethernet connection (if
applicable) on the printer will not be operational.

If the USB selection is not be accessible, the HID EEM
driver that Swift ID uses to connect via a USB
connection has not been installed.

This driver can be found on the installation CD or it can
be down loaded from the HID Global support page.

The easiest method for enabling Swift ID is to un-
install the printer driver and its components and go
through the installation procedure.
Select the desired connection type for the Swift ID
application: USB or ETHERNET.
All rights reserved
53