HID DTC1000M User Manual page 122

© 2012 HID Global Corporation
Configuring Fluorescent Data (F-Panel for YMCFKO Ribbon) using the
Workbench
Step Procedure
11 a. Save this template using the Save button
b. Close the Workbench. (Note: Any Software program file printed with the
YMCFKO Ribbon installed into the Printer will print this design with the F-
Panel of the Ribbon. It will print the same file each time unless you recreate a
new template.)
12 Set the Ribbon for YMCFKO in the Printing Preferences. (Note: The
"Automatically detect the installed Ribbon for every print job." function may also
be used. The F-Panel Ribbon must be installed for this process to work.)
13 Check Invert F-Panel Image to create a negative of the fluorescent image.
 This refers to the ability to cause light or white areas of the image to fluoresce
and dark colors to remain dark on the printed card when exposed to a UV
light.
 This was requested because the fluorescent dye color is bright when black
light is applied to it.
 By default, the dark areas of the image will fluoresce on the card and the
lighter or white areas will have no dye applied. (Note: This may improve the
look of the person‟s image if used for the Logo.)
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
All rights reserved
122