HID DTC1000M User Manual page 52

© 2012 HID Global Corporation
Using the Advanced Settings tab
Setting
Erase Heat Offset
Write Heat Offset
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
Option
Adjust the Erase temperature for the rewriteable cards as
needed.
 Increase the Current Setting to cause more heat to
be used in the erasing process.
OR
 Decrease the Current Setting to cause less heat to be
used in the erasing process.
(Note: Erase Heat Offset provides user ability to control
the Printhead heat level when the Erase Operation is
performed. Appropriate heat levels should be applied for
the proper erase process. This setting should be adjusted
for proper erasure.)
Adjust the Write temperature for the rewriteable cards as
needed.
 Increase the Current Setting to cause more heat to
be used in the printing process of a rewritable card.
OR
 Decrease the Current Setting to cause less heat to be
used in the printing process of a rewritable card.
(Note: Write Heat Offset provides user ability to control
the Printhead heat level when the Write Operation is
performed. Appropriate heat levels should be applied for
the proper writing process.)
All rights reserved
52