HID DTC1000M User Manual page 49

© 2012 HID Global Corporation
Using the Advanced Settings tab
Setting
Ribbon Calibrate Green
Ribbon Green LED Level
Ribbon Calibrate Blue
Ribbon Blue LED Level
Ribbon Print Tension
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
Option
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
Use the Ribbon Tension option to increase or
decreases the amount of tension (drag) on the Ribbon
during printing.
All rights reserved
49