HID DTC1000M User Manual page 64

© 2012 HID Global Corporation
Using the Magnetic Encoding Tab – ISO Standards
Window TAB
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
Procedure
If you select JIS II
Encoding, specific
standards are used.
Select the Coercivity
option (Oersted) that
matches the card type.
Select this option to shift
the recorded magnetic
data to the left-hand
side of the card's
Magnetic Stripe.
Select the Magnetic
Track Selection option
to specify which track is
to be configured through
the Magnetic Track
Options.
Procedure (continued)
This selection disables all the
Magnetic Track Options tabs.
It also disables the Coercivity
dropdown function and Shift
Data Left checkbox option.
The default Coercivity is 600 Oe.
 High Coercivity 4000
Oersted
 Fargo‟s High Coercivity
UltraCard IIIs are 2750
Oersted
 Medium Coercivity=600
Oersted
 Low Coercivity = 300
Oersted
This is useful in situations that
require cards to be readable
with insert type readers.
This applies if the application
being used
requires
customization of the standard
ISO encoding process.
All rights reserved
64