HID DTC1000M User Manual page 13

© 2012 HID Global Corporation
Technical Specifications
Term
Supply Voltage
Supply Frequency
Warranty
Encoding Options
Supported
Options
Software
Display
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
Function
100-240 VAC, 1.6 A
50 Hz / 60 Hz
Printer – Two years; Printhead – Two years, unlimited pass with
UltraCard™
 125kHz (HID Prox) reader
 13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693)
read/write encoder
 Contact Smart Card Encoder reads from and writes to all
ISO7816 1/2/3/4 memory and microprocessor smart cards
(T=0, T=1) as well as synchronous cards

ISO Magnetic Stripe Encoding, dual high- and low-coercivity,
Tracks 1,2 and 3
Single Wire Ethernet and USB 2.0 Interface for inline printing
and encoding

Single wire Ethernet encoding is only available for iCLASS
and Contact Smart Card encoding)

Dual-Sided Printing Module – Upgradable

Dual Input Card Hopper – Upgradable (DTC4000)

Same-Side Input / Output Card Hopper – Upgradable
(DTC4000)

Smart Card Encoding (contact / contactless) – Upgradable

Magnetic Stripe Encoding – Upgradable

Printer Clearing Kit
Swift ID™Embedded Badging Application, FARGO Workbench
Diagnosis Utility
Color changing status buttons (DTC1000, DTC4000)
Graphical Display (DTC4000)
All rights reserved
13