Computer Setup Menus; File Menu; Security Menu - HP Compaq 6735b Maintenance And Service Manual

NOTE:
settings.

Computer Setup Menus

The menu tables in this section provide an overview of Computer Setup options.
NOTE:
computer.

File menu

Select
System Information
Set System Date and Time
Restore defaults
Ignore changes and exit
Save changes and exit

Security menu

NOTE:
Select
User Management (requires an
administrator password)
Password Policy (requires an
administrator password)
Allow HP SpareKey Enrollment
HP SpareKey
Fingerprint Reset on Reboot (if
Present)
Change Password
DriveLock Passwords
Automatic DriveLock
Downloaded from www.Manualslib.com
Your password settings and security settings are not changed when you restore the factory
Some of the Computer Setup menu items listed in this chapter may not be supported by your
To do this
●
●
Set or change the date and time on the computer.
Replace the configuration settings in Computer Setup with the original factory settings.
(Hard drive mode, password settings, and security settings are not changed when you
restore the factory settings.)
Cancel any changes entered during the current session. Then exit and restart the computer.
Save changes and exit Save any changes entered during the current session. Then exit and
restart the computer. Your changes go into effect when the computer restarts.
Some of the menu items listed in this section may not be supported by your computer.
To do this
●
●
Revise password policy criteria.
Enable/disable permission to enroll or reset HP SpareKey.
Enable/disable HP SpareKey (enabled by default).
Enable/disable the fingerprint reader (select models only; disabled by default).
Enter, change, or delete a BIOS administrator password.
●
●
NOTE:
on (not restarting) the computer.
Enable/disable Automatic DriveLock support.
manuals search engine
View identification information for the computer and the batteries in the system.
View specification information for the processor, cache and memory size, system
ROM, video revision, and keyboard controller version.
Create a new BIOS user account.
View a list of ProtectTools users.
Enable/disable DriveLock on any computer hard drive (enabled by default).
Change a DriveLock user password or master password.
DriveLock settings are accessible only when you enter Computer Setup by turning
Computer Setup Menus 105