Docking the Computer in a Tower System
WARNING:
!
hands away from the rear of the computer when docking.
CAUTION:
a computer on for the first time while it is docked.
To dock the computer in the desktop expansion base in an
optional tower stand, follow these steps:
1. Turn off the computer, if it is on. If you are not sure whether
the computer is off or in Hibernation, turn the computer on,
then shut it down.
NOTE:
shutting it down, refer to "Preparing to Dock the Computer"
in Chapter 4.
2. Turn off then disconnect any external equipment connected to
the computer. Disconnect cables to any installed PC Cards.
Disconnect the computer power cord.
3. Close the computer, if it is open.
11-4 Setting Up a Tower System
To avoid the risk of personal injury, keep fingers and
Set up a new computer while it is undocked. Do not turn
For information about docking the computer without