Table of Contents
Advertisement
Inserting the Expansion Board
To insert the expansion board onto the input/output (I/O)
assembly, follow these steps:
1. There are four expansion board connectors.
If you have removed the top slot cover, you can insert the
expansion board into one of the two top expansion board
slot connectors 1 and 2.
If you have removed the bottom slot cover, you can insert
the expansion board into one of the two bottom expansion
board slot connectors 3 and 4.
Select the connector within a slot that matches the
connectors on the expansion board. For example, insert a
PCI expansion board into slot connector 1 or 3; insert
an ISA expansion board into slot connector 2 or 4.
Identifying the Expansion Board Connectors
: The top expansion board slot comprises two connectors, 1
NOTE
and 2. The bottom slot comprises connectors 3 and 4. Only one
expansion board can be installed per slot. If you are installing an
expansion board in the top slot, use connector 1 or 2. If you are
installing an expansion board in the bottom slot, use connector 3
or 4.
9-6 Installing and Removing an Expansion Board
Advertisement
Table of Contents
