HP Armada 7300 Installation And Operation Manual page 91

Removing the Rear Panel
To remove the rear panel, follow these steps:
1. Position the expansion base with the rear panel facing you.
2. Slide the rear panel release latch left to the open position.
Sliding the Rear Panel Release Latch to Release the Rear Panel
3. Using both hands, grasp the bottom sides of the rear panel and
swing the bottom out and up until it disengages.
Removing the Rear Panel
4. When you feel the rear panel detach from the top cover of the
expansion base, lift it up and away from the expansion base.
10-4 Installing and Removing a Half-Height Bay Device