Undocking the Computer
Automatic Undocking of the Computer
To undock the computer from the desktop expansion base using
the motorized undocking mechanism, follow these steps:
1. Unlock the expansion base keylock if it is locked.
NOTE:
the System."
2. Turn off the computer, if necessary, by sliding the power
switch on the computer or the power switch 1 on the
expansion base.
If the computer is running Windows 95, you can undock the
computer while it is on, off, or in Suspend.
If the computer is running an operating system other than
Windows 95, turn off the computer before you undock it.
3. Turn off then disconnect any external equipment connected to
the computer. Disconnect cables to any installed PC Cards.
4. Close the computer, if it is open.
5. Press the computer eject button 2 on the expansion base. This
activates the motorized docking mechanism, which pushes the
computer away from the expansion base and disconnects the
docking connector on the computer 3 from the docking
connector on the expansion base 4.
4-6 Docking and Undocking
For keylock information, refer to Chapter 5, "Securing