Table of Contents
Advertisement
Releasing the Computer from the
Desktop Expansion Base
1. Slide the manual release latch to the right.
Sliding the Manual Release Latch to the Right
2. Pull the computer away from the expansion base along the left
alignment guide.
3. Replace the rear panel by inserting the tabs on the top of the
rear panel into the slots in the top cover. When the tabs are in
the slots, pivot the bottom of the rear panel downward until it
is seated.
4. Secure the rear panel by moving the rear panel release latch
right to the closed position.
5. Reconnect the power cord and all external device cables to the
expansion base.
4-10 Docking and Undocking
Advertisement
Table of Contents
