Installing And Removing A Half -Height Bay Device; Installing A Half-Height Bay Device - HP Armada 7300 Installation And Operation Manual

chapter
I
NSTALLING AND
H -H
ALF

Installing a Half-Height Bay Device

This procedure explains how to install a standard half-height drive
in a half-height bay. A half-height drive power cable is
preinstalled inside the desktop expansion base.
The procedures for installing an Armada 7000 Half-Height
MultiBay Adapter or an LTE 5000 Half-Height MultiBay
Adapter are similar. Refer to the adapter documentation for
specific instructions.
Use slotted Torx T-10 and T-15 screwdrivers.
NOTE:
10
B
EIGHT
Installing and Removing a Half-Height Bay Device 10-1
R
EMOVING A
D
AY EVICE