Table of Contents
Advertisement
Connecting a Network Cable
This connection requires an unshielded twisted pair cable with
RJ-45 jacks at each end. Request the cable from your network
administrator or authorized service provider.
!
To connect the cable to the desktop expansion base and the
network jack, follow these steps:
1. Connect the cable to the RJ-45 1 jack on the expansion base.
2. Connect the other end of the cable to the network jack 2.
Connecting the System to an Ethernet Network
3-12 Getting Connected
WARNING:
To reduce the risk of electric shock, fire, or
damage to the equipment, do not plug a telephone cable into
the Ethernet RJ-45 jack.
Advertisement
Table of Contents
