Table of Contents
Advertisement
Removing a Drive or Drive Assembly
from a MultiBay
To remove a drive or drive assembly (a drive inserted into a drive
adapter) from a desktop expansion base MultiBay, follow
these steps:
1. Save and close all files and applications on the drive you
are removing.
2. Unlock the expansion base keylock.
3. If you are removing a diskette drive or a CD-ROM drive,
ensure that no diskettes or CDs are in the drive and that the
CD-ROM drive tray is closed.
4. If the computer is docked, turn off the computer.
5. Slide the MultiBay release latch 1 to the left to release the
drive or drive assembly from the MultiBay.
6. Slide the drive or drive assembly out of the MultiBay 2.
Removing a Drive Assembly from a Desktop Expansion Base MultiBay
7-14 Using Removable Drives
Advertisement
Table of Contents
