To remove a drive from an Armada 7000 Removable Drive
MultiBay Adapter with two release latches
1. Slide the two release latches on the bottom of the adapter away
from the center of the adapter until they click into the
unlocked position 1.
2. Push forward on the back of the drive 2 (without touching the
connector) until you can grasp the front of the drive.
3. Slide the drive out of the adapter 3.
4. Slide the two release latches toward the center of the adapter
until they click into the locked position 4.
Removing a Drive from an Armada 7000 Removable Drive MultiBay Adapter with Two
Release Latches
Using Removable Drives 7-11