Installing And Removing An Expansion Board; Installing An Expansion Board - HP Armada 7300 Installation And Operation Manual

Hp armada 7300: operations guide
Hide thumbs Also See for Armada 7300:
Table of Contents

Advertisement

chapter
I
NSTALLING AND
E
XPANSION

Installing an Expansion Board

CAUTION:
computer in the Armada 7800 Family of Personal Computers,
installing an optional video card in the expansion base can disable
the Advanced Graphics Port functionality of the system.
Use the following procedure to install a 32-bit PCI expansion
board or a 16-bit or 8-bit full-length ISA expansion board.
Any expansion board can be placed in any available expansion
board slot.
Any two expansion boards can be installed at the same time.
If you are installing an expansion board, such as a SCSI controller,
that requires a cable connection to a half-height
bay, refer to the expansion board documentation for
connection information.
A SCSI device can be used externally by connecting it to the
NOTE:
external connector on the SCSI controller. For information, refer
to "Accessing Expansion Board Connectors" in this chapter.
9
B
OARD
If you are using the desktop expansion base with a
R
EMOVING AN

Installing and Removing an Expansion Board 9-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Armada 7400Armada 7700Armada 7000 series

Table of Contents