Table of Contents
Advertisement
5. If you are not installing another expansion board in the same
expansion slot, replace the expansion board slot cover. (This is
the slot cover that was removed when the expansion board was
installed.) Attach it to the expansion slot cover chassis with
the screw that you removed in step 3.
If you are inserting a different expansion board into the same
expansion slot, refer to "Installing an Expansion Board"
earlier in this chapter and follow the instructions in these
sections:
First, "Inserting the Expansion Board onto the
I/O Assembly"
Second, "Replacing the Rear Panel"
Third, "Accessing Expansion Board Connectors"
Replacing an Expansion Slot Cover
6. Replace the rear panel by inserting the tabs on the top of the
rear panel into the slots in the top cover. When the tabs are in
the slots, pivot the bottom of the rear panel downward until it
is seated.
7. Secure the rear panel by moving the rear panel release latch
right to the closed position.
8. Reconnect the power cord and all external equipment cables to
the expansion base.
9-10 Installing and Removing an Expansion Board
Advertisement
Table of Contents
