Table of Contents
Advertisement
Removing the Top Cover
WARNING:
!
allow the internal system components to cool before touching them.
CAUTION:
components. Before beginning this procedure, ensure that you are
properly grounded. For more information, refer to Appendix C,
"Electrostatic Discharge."
To remove the top cover, follow these steps:
1. Reposition the expansion base so that the front of the
expansion base is facing you.
2. Remove the alignment tray 1 from the expansion base by
pulling the docking latch 2 forward.
Removing the Alignment Tray from the Desktop Expansion Base
To reduce the risk of personal injury from hot surfaces,
Electrostatic discharge (ESD) can damage electronic
Installing and Removing a Half-Height Bay Device 10-5
Advertisement
Table of Contents
