HP Armada 7300 Installation And Operation Manual page 71

LTE 5000 MultiBay Hard Drive Carrier
To insert a drive into an LTE 5000 MultiBay Hard Drive
Carrier
1. If the drive 1 is in a packing or storage tray, remove it from
the tray and from any other packing materials.
2. Make sure the latch 2 inside the carrier is pushed to the right.
3. Place the hard drive into the carrier with the contacts 3 facing
the back of the carrier.
4. Slide the drive to the back of the carrier until it is seated.
5. Push the latch inside the carrier to the left to secure the hard
drive in the carrier.
Inserting a Drive into an LTE 5000 MultiBay Hard Drive Carrier
To remove a drive from an LTE 5000 MultiBay Hard Drive
Carrier
1. Push the latch inside the carrier to the right to release the drive
from the carrier.
2. Pull the drive toward the front of the carrier as you lift it out of
the carrier.
7-12 Using Removable Drives