To insert a drive into an Armada 7000 Removable Drive
MultiBay Adapter with two release latches
1. Slide the two release latches on the bottom of the adapter away
from the center of the adapter until they click into the
unlocked position 1.
2. Hold the drive with the connector on the right side facing the
front of the adapter.
3. Slide the drive into the adapter until the front of the drive 2 is
flush with the front of the adapter.
4. Slide the two release latches toward the center of the adapter
until they click into the locked position 3.
Inserting a Drive into an Armada 7000 Removable Drive MultiBay Adapter with Two
Release Latches
7-10 Using Removable Drives