Adjusting the Width of an Optional Tower Stand
You can adjust the width of a tower stand to the thickness of your
computer with preset or custom settings.
Width settings are retained by the tower stand. You will not
need to adjust these settings again unless you want to dock a
different-sized computer.
Width settings include the width of the expansion base.
Adjusting a Tower Stand to a Preset Width
To adjust a tower stand to the preset width setting for a computer
model listed on the width table
1. Undock the computer.
2. Find the setting for your computer model on the width table.
3. Align the width selector
preset width setting for your computer by pulling the bottom
of the width adjuster outward, then up or down.
NOTE:
preset width setting.
Aligning the Width Selector with the Preset Width Setting for a Computer in the Armada
7300 Family of Personal Computers
11-6 Setting Up a Tower System
The width selector may not align precisely with the
, follow these steps:
on the width adjuster
with the