Locking Components with the Keylock
Locking the keylock secures the system as follows:
The motorized undocking mechanism is disabled.
The computer is anchored to the expansion base by the
docking latch.
The MultiBay device release latches on any MultiBays
and battery bays in the computer and the expansion base
are disabled.
The PC Card security post on the expansion base is locked
in place.
The rear panel release latch is disabled. This denies access to
Any expansion boards installed in the expansion base.
A 100BaseTX Ethernet Module or other component
installed on the input/output (I/O) board of the
expansion base.
The manual release latch used to manually disconnect the
computer from the expansion base.
Locking the keylock does not secure the following items:
PC Cards in the computer.
Diskettes or CDs in the computer or the expansion base.
5-2 Securing the System