Scan Test (Usb Connection) - Fujitsu ScanSnap iX500 Getting Started

Scan Test (USB Connection)

After you perform a scan, check the linkage with applications.
For details on documents that can be scanned with the ScanSnap, refer to "ScanSnap Overview" in the
Basic Operation Guide.
ATTENTION
If the ScanSnap Manager icon is
connection between the mobile device and the ScanSnap is disconnected, the ScanSnap Manager icon
changes to .
1.
Load a document in the ScanSnap.
1. Pull the stacker on the ADF top section towards you.
2. Prepare to load a document in the ScanSnap.
3. Load the document on the ADF paper chute (cover), and adjust the side guides to the size of the
document.
1.
Stacker
2.
Press the [Scan] button on the ScanSnap.
 Scanning starts. The Quick Menu appears when
scanning is completed.
ATTENTION
If scanning does not start, refer to "Troubleshooting"
in the ScanSnap Manager Help.
, exit ScanSnap Connect Application on the mobile device. When the
2.
Pull Out the Extension
Open the Side
Guides
Raise the
Stacker
3.
11
Set the
Document
Face-down
and Top-first