Multifeed Detection When Scanning In Manual Feed Mode - Fujitsu FI-5950 Operator's Manual
Image scanner
Hide thumbs
Also See for FI-5950:
- Operator's manual (257 pages) ,
- Getting started (27 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
8.5 Multifeed detection when scanning
in manual feed mode
Set whether to detect multifeed during manual feed mode or not.
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page 127
2.
Select [Device Setting 2] from left side list in the window, and select
[Multifeed detection when scanning in manual feeding mode] from its
lower level.
3.
Select one of the following option.
Disable
Follow driver settings : Multifeed detection is valid only when device driver allows multi-
150
8.5 Multifeed detection when scanning in manual feed mode
.
: Does not detect multifeed at manual feed mode.
feed detection.
Advertisement
Table of Contents
