Chapter 6 Replacing The Consumables - Fujitsu FI-7600 Operator's Manual

Chapter 6 Replacing the
Consumables
This chapter describes how to replace the consumables for the scanner.
The inside of the ADF becomes very hot when the scanner is
being used.
Before you replace the consumables, make sure to turn off the
power, unplug the power cable and wait at least 15 minutes for
the inside of the ADF to cool down.
6.1 Consumables and Replacement Cycles................................................................................................... 113
6.2 Replacing the Brake Roller....................................................................................................................... 114
6.3 Replacing the Pick Roller ......................................................................................................................... 117
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary