Table of Contents
Advertisement
3.2.5 Test IR commands in IR-712A
This section (Fig. 3-18) can help users to test the IR commands saved in IR-712A after
downloading IR commands to it. Click the "Transmit from IR-712A" button to send a Modbus
command to the IR-712A with a specified IR command serial number and IR output channel.
Meanwhile, a Modbus/RTU command text for reference is shown underneath. Users can click
"Copy" button to copy the Modbus command to the clipboard and use it in programming their
applications.
Figure 3-18 Test IR commands saved in IR-712A.
3.2.6 Copy IR Commands from File
Click Menu [File]->[Copy IR Cmds from File] to open the copy window as shown in Figure 3-19.
Please follow the steps in the Figure 3-20 to copy the IR commands.
[1] Browse and load the source IR learning data file.
[2] Select the device name of the source IR data file.
[3] Select the desired IR commands for copy. Use "keyboard Ctrl" + "mouse left" buttons
or "keyboard Shift"+ "mouse left" to select multiple source IR commands.
[4] Select the current Device Name.
[5] Select the destination start position of IR commands for copy.
[6] Click the middle copy (">>") button.
IR-712A User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Figure 3-19 Open window for copying IR commands.
Version 1.9
E-mail: service@icpdas.com
32
Page：
Advertisement
Table of Contents
