ICP DAS USA IR-712A User Manual page 31

Universal ir learning remote module

Table of Contents

• Run Command" Button

When learning an IR command is finished, users can test this IR command

emitted from the IR-712A by clicking "Run Command" button. The "Output

Channel" combo box specifies the IR output channels.

• "Save this Cmd" Button

This button can save the current learned IR command into the Utility. When

finishing all the learned commands, click Menu [File]->[Save IR Commands to File]

to save all IR commands to an backup file (*.ird).

• "Clear this Cmd" Button

Click "Clear this Cmd" button to remove the learned IR command data

corresponding to the item in the "Command Name" combo box.

• "Clear All Cmds" Button

Click "Clear All Cmd" button to remove all the learned IR command data

corresponding to all the items but not items themselves in the "Command Name"

combo box. Please click Menu [File]->[Unload IR Commands] to clear all IR

commands data as well as reset the names and quantity of the items to the

default in "Command Name" combo box.

• "Output Channel" Combo Box

The "Output Channel" Combo Box specifies the IR output channels when clicking

"Run Command" button to emit the learned IR command. Besides the single

channel 1 and 2 for selection, simultaneous channel 1 and 2 is also provided.

IR-712A User Manual

Version 1.9

E-mail: service@icpdas.com

Page：

Table of Contents