Batch Download Ir Commands - ICP DAS USA IR-712A User Manual

Universal ir learning remote module

Table of Contents

3.2.8 Batch Download IR Commands

This item is for downloading IR commands to multiple IR-712A in sequence. The setup steps are

as follow:

[1] Set the Modbus Net ID of the IR-712A. The Net ID should be different among

IR-712As.

[2] Connect these IR-712A to the same RS-485 bus.

[3] Connect to one of the IR-712A by clicking the "Open" button in the utility.

[4] Click Menu [Download]->[Batch Download IR Commands to IR-712A] to open the

window of Batch Download IR Commands. Select the range of the Net ID. Click Start

button to start the progress.

 Figure 3-25 Previous IR waveform is at underneath position.

IR-712A User Manual

Version 1.9

E-mail: service@icpdas.com

Page：

Table of Contents