Table of Contents
Advertisement
Test and Save Learned Commands
The functions of this section are described as follows:
• "Device / Command Name" Combo Box
You can review the items in the "Device Name" and "Command Name" combo
boxes after setting of device and IR command quantity. Users can do the IR
learning according to these items.
• IR Command Learning State
The rectangle at the right side of the "Command Name" combo box in Fig. 3-17
shows the storage state for the current IR learning command. Three colors
indicate three different states as follows:
Color
Red
Yellow
White
IR-712A User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Figure 3-16 Test & save IR commands section.
Table 3-3 The state of IR command storage
The IR learning command has been saved in the item of the
"Command Name" combo box.
The IR learning command has been saved temporarily in the item of
the "Command Name" combo box. If the other item is selected, the
data would disappear.
There is no IR learning command in this item.
Figure 3-17 The rectangle to show IR learning state
Description
Version 1.9
E-mail: service@icpdas.com
30
Page：
Advertisement
Table of Contents
