ICP DAS USA IR-712A User Manual page 28

Universal ir learning remote module

Table of Contents

 Step 1: Set the IR device quantity

The max quantity of controlled devices is 11. This function is convenient for users to

manage IR commands in groups as shown in Fig. 3-10.

 Figure 3-10 The quantity setting of the device (Step1).

 Step 2: Define the device names and set the IR commands quantity

This step (Fig. 3-11) can set the names of the devices and the quantity of the IR

command. The prefix number of each device name is the device serial number. The

quantity of the IR command cannot exceed 224, or the utility would pop up an error

message box and show the remaining quantity for configuration (Fig. 3-12).

 Figure 3-11 Define the name and the quantity of the IR commands (Step2).

 Figure 3-12 Error message box for exceeding total IR commands Qty.

IR-712A User Manual

Version 1.9

Page：

E-mail: service@icpdas.com

Table of Contents