Display Waveforms Of Ir Commands - ICP DAS USA IR-712A User Manual

Universal ir learning remote module

Table of Contents

3.2.7 Display Waveforms of IR Commands

Click the menu [Tool]->[Waveform of IR Commands] to open the window for demodulated

waveform display of an IR command in the "Command Name" combo box as shown in Figure

3-23. When the other IR command is selected or a new IR command is learned, the IR waveform

will appear at the upper position and the previous IR waveform is moved to the lower position

(Figure 3-24).

 Figure 3-23 Opened waveform window shows current IR command.

 Figure 3-24 Previous IR waveform is at underneath position.

IR-712A User Manual

Version 1.9

Page：

E-mail: service@icpdas.com

Table of Contents