Table of Contents
Advertisement
The "Get Setting" button will be executed once when the "Basic Settings" window is opened in
the beginning. Three buttons located at the right side of the window are described in the Table
3-2.
Table 3-2: Three buttons in the window of basic settings
Button Name
Get Setting
Set Temporarily
Set Permanently
‧Reset Basic Settings on IR-712A
If it is failed to communicate with IR-712A and the record of basic settings is lost, click
this item to open the reset window as shown in Fig. 3-6. The steps of reset are as
follows:
(1) Connect PC to the RS-232 port of IR-712A and click "Open" button in the utility to
open the COM port of PC.
(2) Click Reset button within 3 seconds after cycling the power of IR-712A.
(3) A dialog as Fig. 3-7 shows that the resetting to default values is done. Notice that
the parameters resetting is temporary. Please go to "IR-712A Basic Settings"
interface and click "Set Permanently" button to retain the settings.
IR-712A User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Get the current basic parameter settings of IR-712A.
Set the settings of IR-712A to the parameters selected in the
window temporarily. Cycling the power will restore IR-712A to
previous settings.
Set the settings of IR-712A to the parameters selected in the
window. IR-712A will retain the settings after power cycling.
Figure 3-6 IR-712A reset window
Description
Version 1.9
E-mail: service@icpdas.com
25
Page：
Advertisement
Table of Contents
