Table of Contents
Advertisement
Step 3：Comment the IR command name
This step provides the interface to comment each IR command with a name. It is
convenient to know the function of an IR command from the name. The prefix number of
each IR command name means the serial number saved in the IR-712A and can be a
reference in the Modbus command to the IR-712A.
Figure 3-13 Comment the IR command name (Step3).
3.2.4 Test and Save Learned IR Commands
This section provides the function of enabling IR learning mode, saving IR commands
temporarily and testing the learned IR commands as shown in Figure 3-14.
Figure 3-14 Test & save learned IR commands section.
IR Learning Mode
This interface (Figure 3-15) provides "Learn On" and "Learn Off" buttons. After clicking
the "Learn On" button, the IR-712A would turn into IR learning mode and the TR/LN
LED is turned on to wait for the remote control's IR signal. The "Learn Off" can exit the
IR learning mode.
IR-712A User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Figure 3-15 Enable/Disable IR learning mode
Version 1.9
E-mail: service@icpdas.com
29
Page：
Advertisement
Table of Contents
