(4) Please refer to section 2.6.3 for the other way to restore the default communication
settings for IR-712A (RevB).
(4) Tool
‧Update Firmware to IR-712A
Launch the "Update Firmware Tool". Please refer to section 2.6.1 for more
information.
‧Waveform of IR Commands
Indicate the demodulated IR waveforma of the IR commands. Please refer to section
3.2.7 for the details.
(5) Help
‧About IR-712A Utility
This item will show a window which contains the version numbers of the utility and the
IR-712A's firmware. The firmware version will be indicated when the utility can
communicate with the IR-712A module.
IR-712A User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Figure 3-7 Reset to default settings temporarily.
Version 1.9
E-mail: service@icpdas.com
26
Page: