Omron F3SG-2RE0430P30 User Manual page 261

Control Unit
Appearance
Control Unit
Appearance
Control Unit
Appearance
Model
G9SA-301-P Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Model
G9SB-301-B Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Auto reset
G9SB-301-D Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Manual reset
G9SB-200-B Safety output (relay): NO
contact x 2
Auto reset
G9SB-200-D Safety output (relay): NO
contact x 2
Manual reset
Model
G9SX-AD322-T15 Safety output (solid-state):
source output (PNP) x 3
(instantaneous), source output
(PNP) x 2 (OFF-delayed)
Auxiliary output (solid-state):
source output (PNP) x 2
Output
• An XS5F-D421-80-F Round
Water-resistant Connector is
required.
• An NPN type of F3SG-R can be
connected.
Output
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
• Thickness of a type of three N.O.
and one N.C. contacts is 22.5
mm.
• Thickness of a type of two N.O.
contacts is 17.5 mm.
Output
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
• 16 patterns of OFF-delayed
output for up to 15 seconds can
be set.
• The OFF-delayed output can be
used as instantaneous output by
setting it to 0 second.
• Can be configured for partial
control and total control.
• Can be extended to connect a
relay unit.
Appendix
Remarks
Remarks
Remarks
F3SG-R
237
User's Manual
E