Diagnostics; Self Test At Power On; Testing The Terminal Unit Through The Keyboard, Displaying Program Version No - Furuno Felcom 15 Operator's Manual

8. MAINTENANCE, TROUBLESHOOTING
8.2

Diagnostics

The system is equipped with a diagnostic test which checks it for proper
operation.
8.2.1

Self test at power on

The terminal unit performs the ROM sum test and RAM read and write test when
turned on. If the test results are normal the equipment goes into standby. If error
is found you cannot transmit.
8.2.2 Testing the terminal unit through the keyboard, displaying
program version no.
This test can only be initiated from the main terminal and it must be idle
condition to execute the test.
1. Press the [F7] key to display the Options menu.
2. Press the [7] key ([6] key if FELCOM functions as an EGC receiver) to
display the Test menu.
3. Press the [3] key to choose Diagnostic Test.
4. Yes is selected; press the [Enter] key to start the test. The message "Now
testing" (flashing) appears during the testing.
8-2
Options
1. Login
2. Logout
3. Abort
4. Select NCS
5. Ocean Region
6. LES Information
7. Test
FELCOM functions as
Inmarsat MES
Options menu
Options
1. Login
2. Logout
1. PV Test
3. Abort
2. PV Test Result
4. Select NCS
3. Diagnostic Test
5. Ocean Region
4. Distress Alert Button Test
6. Test
Test menu
Options
1. Login Test
2. Logout
Diagnostic Test
1. PV Test
3. Abort
2. PV Test Result
4. Select NCS
3. Self Test
5. Ocean Region
4. Distress Alarm Button Test
6. Test
Start window
Options
1. Login
2. Logout
3. Abort
4. Select EGC Ch.
5. LES Information
6. Test
FELCOM functions as
EGC receiver
Test
Start
No
Yes