Furuno Felcom 15 Operator's Manual page 147

16.Press the [Esc] key to show the update window.
17. Yes is selected; press the [Enter] key to register settings.
Distress Alert updated.
Press any key to escape.
Distress alert setup, distress alert updated
18. Open the cover of the [DISTRESS] button on the terminal unit or the Distress
Alert Unit/Received Call Unit IC-305.
19. Press the [DISTRESS] button until the lamp in the button lights continuously
(about four seconds).
The distress alert will not be transmitted until the lamp in the button lights
continuously and the audio alarm sounds. The message "Sending Distress
Alert" appears on the screen while the distress alert is being transmitted.
When you receive acknowledgment of the distress alert from an LES, the
message "Distress Acknowledgement Received" appears on the screen, the
lamp flashes slowly and the audio alarm sounds intermittently. To silence the
audio alarm, press the [F10] key on the keyboard.
Setup
Distress Alert Setup
LES ID 303
Update Time 06:23 02-02-25 (YY-MM-DD)
Position LAT 30:00N
LON 140:00E
Protocol Maritime
Nature Grounding
Course 187
Speed 0 KTS
Distress alert setup, update window
Setup
Distress Alert Setup
LES ID 303
Update Time 06:23 02-02-25 (YY-MM-DD)
Position LAT 30:00N
LON 140:00E
Protocol Maritime
Nature Grounding
Course 187
Speed 0 KTS
6. DISTRESS OPERATIONS
Update
Yes No
6-3