Editor Menu Setup - Furuno Felcom 15 Operator's Manual

3. FILE OPERATIONS
3.2.3

Editor menu setup

The Editor menu sets the parameters of the text editor.
1. Press the [F8] key to display the Setup menu.
2. Press the [3] key to display the Editor Setup menu.
File
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
3. The illustration above shows the default editor setup settings. To change
settings:
a) Press the [ ] or [ ] key to choose item.
b) Press the [Enter] key to open corresponding options window.
c) Choose setting with the [ ] or [ ] key.
d) Press the [Enter] key to register setting.
e) Press the [Esc] key twice to return to the standby display.
Text Mode:
Edit Mode:
Word Wrap:
Line No.:
Tab Width:
Column Width:
Cursor Type:
Scroll:
3-4
Edit Transmit EGC
Setup
Editor Setup
Text Mode Ascii
Edit Mode Insert
Word Wrap ON
Line No. ON
Tab Width 4 Char
Column Width 69
Cursor Type Block
Scroll Full Screen
Choose "Telex" when creating a telex message. Only upper
case alphabet is permitted in telex. Use "ASCII" when
creating an e-mail message. Upper and lower case alphabet
may be used in an e-mail.
Choose "Insert" (insert character at cursor location) or
"Overwrite" (write over character at cursor location).
Turns on/off automatic hyphenation at the end of a line.
Turns line number display on or off.
Sets horizontal tab width; two, four or eight tabs per line.
Choose 69 for Telex or 40 to 80 for ASCII.
Chooses cursor configuration, "
Sets how much the screen moves up over the page (Full
Screen or Half Screen) when [PgUp] or [PgDn] key is
operated.
Reports Logs Options
Editor setup menu
Setup Position StopAlarm
■
" or underline.