Decoding E-Mail Attachment - Furuno Felcom 15 Operator's Manual

3. FILE OPERATIONS
3.10

Decoding E-mail Attachment

When you can't read an e-mail attachment because it has been coded by MIME
(Multipurpose Internet Mail Extensions), you may decode it as below.
1. Save the MIME-coded file to a floppy disk. (See paragraph 4.2.5 for the
procedure.) This step is not necessary if Auto Receive Message Save is
turned on in the Auto Mode Setup menu.
2. Press the [F1] key to open the File menu.
3. Press the [9] key to choose MIME(Decode).
File
1. New
2. Open
3. Close
4. Save
5. Delete
6. Rename
7. Print
8. Format Disk
9. MIME (Decode)
4. Press the [↑] or [↓] key to choose the file you want to decode.
5. Press the [Enter] key.
6. Yes is selected; press the [Enter] key to decode the file.
3-20
Edit Transmit EGC
File
Decode
ALT-N
[A:\E0970715
ALT-O
Filename Size
ALT-Q
868
E0970715.001
ALT-S
372
E0970715.002
ALT-D 6794
E0970715.003
864
E0970715.004
ALT-P
4 Files exist
To View: SPACE Make Dir: INS
Checking 'E0970715.001' . . .
Decode 'ABC.ini'?
File attachment
File
1. New ALT-N
[A:\ABC.ini
2. Open ALT-O
Filename
3. Close ALT-Q
E0970715.001
4. Save ALT-S
E0970715.002
5. Delete ALT-D
E0970715.003
6. Rename
E0970715.004
7. Print ALT-P
4 Files exist
8. Format Disk
To View: SPACE Make Dir: INS
9. MIME (Decode)
Reports Logs Options
]
Date & Time
02-02-25 02:33
02-02-25 02:52
02-02-25 02:59
02-02-25 03:13
579584 bytes free
Remove Dir: DEL
Decode window
File chosen at step 4
MIME Decode
Decode
Yes
Decode window
Save
Size Date & Time
868 2002-02-25 02:33
372 2002-02-25 02:52
6794 2002-02-25 02:59
864 2002-02-25 03:13
579584 bytes free
Remove Dir: DEL
Save window
Setup Position StopAlarm
No
]