Setting The Receive Alarm - Furuno Felcom 15 Operator's Manual

4. INMARSAT C COMMUNICATIONS
4.2.2

Setting the receive alarm

An audio alarm may be set to sound when a routine or confidential telex
message or e-mail is received. The factory setting is OFF.
1. Press the [F8] key to display the Setup menu.
2. Press the [6] key to display the Auto Mode Setup menu.
3. Press the [↑] or [ ] key to choose Receive Alarm.
4. Press the [Enter] key to open the receive alarm options window.
5. To enable the audio alarm, choose ON. The alarm will be released for one
second when a routine or confidential message is received.
6. Press the [Enter] key to close the window.
7. Press the [Esc] key twice.
4-24
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Data Report & Polling Print
Auto EGC Message Save
Auto EGC Message Print
Auto mode setup menu
OFF
OFF
OFF
OFF
OFF