Furuno Felcom 15 Operator's Manual page 54

2. SYSTEM INITIALIZATION
Automatically printing EGC messages
You can turn on/off automatic printing of FleetNET
SafetyNET
messages are automatically printed regardless of printing setting.
1. Press the [F8] key to display the Setup menu.
2. Press the [6] key to display the Auto mode setup menu.
3. Press the [ ] key to choose Auto EGC Message Print and then press the
[Enter] key.
4. Press the [ ] or [ ] key to choose message type and then press the [Enter]
key.
5. Choose ON or OFF as appropriate and press the [Enter] key to close the
window.
Note: When SafetyNET (Safety) is turned off, SafetyNET (Safety) on the
6. Press the [Esc] key three times to return to the standby display.
2-22
TM
(Safety) messages. Distress and emergency SafetyNET
Auto EGC Message Print
System
FleetNET
SafetyNET (Routine)
SafetyNET (Safety)
Auto EGC message print menu
Auto EGC Message Save menu is automatically turned on.
TM
, SafetyNET
Auto Mode Setup
OFF
OFF
OFF
OFF
TM
(Routine) and
TM
(Safety)