Les List; Displaying Toll Charges - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
Note: If the ID or frequency entered is invalid the message "Input Error:
14. Press the [Esc] key twice to return to the standby display.
2.6

LES List

The LES List provides for storage of 44 LES names per ocean region. By
entering approximate toll charges in the LES list, you can see that information on
the Transmit message menu.
2.6.1

Displaying toll charges

Main LESs (LES name and ID) are already registered; but, toll charges are not.
To display toll charges when transmitting do the following:
1. Press the [F8] key to display the Setup menu.
File
2. Press the [9] key to display the Configuration menu.
2-24
NCS ID" (for invalid ID) or "Input Error: Channel No." (for invalid
frequency) appears. Clear the error message by pressing the [Esc]
key. Place the cursor at the invalid ID or frequency code. Then, press
the [Enter] key and enter correct ID or frequency.
Edit Transmit EGC
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
Reports Logs Options
Setup menu
Setup
Configuration
1. Station List
2. LES List
3. EGC Channel List
4. NCS Channel List
5. E-Mail Service List
6. Save/Load
8. Directories
9. Configuration
Configuration menu
Setup Position StopAlarm