Network Setup - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.1.3

Network setup

If the equipment is interfaced with shipboard LAN system, set it up as follows:
1. Press [F8] and [2] to show the System Setup menu.
2. Press the [ ] or [ ] key to choose Network Setup and then press the [Enter]
key.
3. Choose Network and press the [Enter] key.
If you are to receive IP address and subnet mask from DHCP server, go to
step 8.
4. IP address is selected; press the [Enter] key.
5. Enter IP Address of this terminal and then press the [Enter] key.
6. Press the [ ] key to choose Subnet mask and then press the [Enter] key.
7. Enter subnet mask and then press the [Enter] key. Go to step 10.
8. Press the [ ] key to choose DHCP and then press the [Enter] key.
9. Press the [ ] key to choose ON and then press the [Enter] key.
10. Press the [ ] key to choose Host name and then press the [Enter] key.
11. Enter host name and then press the [Enter] key.
12. Press the [ ] key to choose Domain name and then press the [Enter] key.
13. Enter domain name and then press the [Enter] key.
14. Press the [Esc] key to open the update window.
15. Yes is selected; press the [Enter] key to update network settings and return
to the Network Setup menu.
16. Press the [ ] key to choose Mail Getaway and press the [Enter] key.
17. Attach is selected; press the [Enter] key.
2-6
Network Setup
Network
Mail Gateway
Network setup menu
Network
IP Address 000.000.000.000
Subnet mask 000.000.000.000
DHCP OFF
Host name
Domain name
Network settings
Mail Gateway
Attach
Delivery
Server IP
Address Mode FIXED
Mail Address
Mail gateway menu
FELCOM 15's IP address
Subnet mask of shipboard LAN
Shipboard LAN DHCP server
Host name
Domain name
BASE64
Server
000.000.000.000