Entering Own Ship's Position - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.8

Entering Own Ship's Position

When there is no navigation data or Nav Port in the System Setup menu is set
for OFF, enter ship's position manually as follows:
1. Press the [F9] key to display the Position menu.
File
LAT
LON
2. Press the [Enter] key to open the latitude entry window.
3. Enter latitude (XX° XX.XX) and then press the [N] or [S] key as appropriate to
enter coordinate.
4. Press the [Enter] key to close the window.
5. Press the [ ] key to choose LON.
6. Press the [Enter] key to open the longitude entry window.
7. Enter longitude (XXX° XX.XX) and then press the [E] or [W] key as
appropriate to enter coordinate.
8. Press the [Enter] key to close the window.
9. Press the [Esc] key to open the update window.
File
LAT
LON
10. Yes is selected; press the [Enter] key to update position and close the Ship
Position menu. The position entered appears at the bottom right corner of the
system status monitor screen. It is also entered on "Update Distress Alert"
screen (see Chapter 6).
2-34
Edit Transmit EGC
Ship Position
34:30.00N
135:30.00E
Ship position window
LAT
LON
Latitude entry window
LAT
LON
Longitude entry window
Edit Transmit EGC
Ship Position
34:50.00N
000:00.00E
Update
Yes No
Ship position, update
Reports Logs Options
Ship Position
00:00.00N
34:30.00N
000:00.00E
Ship Position
00:00.00N
135:30.00E
000:00.00E
Reports Logs Options
Setup Position StopAlarm
Setup Position StopAlarm