Logout - Furuno Felcom 15 Operator's Manual

2.3.2

Logout

1. Press the [F7] key to display the Options menu.
2. Press the [2] key to display the logout screen.
Note: The terminal unit must be "idle" to logout. When it is not idle, "Ignored:
3. Yes is selected; press the [Enter] key to start logout. The screen now looks
something like the illustration below.
4. When logout is completed, "Successful Logout." appears and "Current State"
changes from LOGOUT to IDLE. Then, turn off the FELCOM 15.
MES is not idle." appears. Press the [Esc] key to return to the standby
display. Wait until the terminal unit becomes idle.
File Edit Transmit EGC
Options
Logout
Current State: IDLE
Successful Login.
DCE F15 Ver.**
Options menu, logout screen
File Edit Transmit EGC
Options
Logout
Starting Logout Process.
Press any key to escape.
Current State: LOGOUT
CALLING
DCE F16 Ver. **
Appearance of display screen during logout
Reports Logs Options Setup Position StopAlarm
Start
Yes No
SYNC ( NCS )
NCS: IOR LOGIN
Reports Logs Options Setup Position StopAlarm
SYNC ( NCS )
NCS: IOR LOGIN
2. SYSTEM INITIALIZATION
02-02-25 02:04 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
02-02-25 02:02 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
2-13